45° and 90° skate
wheel spurs are used
for converging or
diverging two or
more lines of
material onto a main
onveyor line.
Specially designed
for use in limited
access areas where
exact entry is
required by joining
two lines of
conveyor. Specify
right or left hand
unit. Various angles
also available.
AW & SW
SERIES SPECIFICATIONS:
Wheels: 2” x 5/8” Ball Bearing ۰ Axles: 1/4”
on 3” Centers ۰ Frame: 2-1/2” x 1” x 1”, 12
Ga. Galv. or 1/8” Alum. Formed Channel ۰ 5
Cross Braces and 2 Full Length 1” x 1/8”
Alum. Center Supports ۰ Hook and Bolt
Couplers Standard ۰ 10’ Frame Capacity -
Steel: 50lbs/ft, Alum: 30lbs/ft ۰ 5’ Frame
Capacity - Steel: 200lbs/ft, Alum:100lbs/ft
